This is the latest firmware package for the Clipsal C-Bus Network Automation Controller (5500NAC) unit. Refer to the user manual for instructions as to how to upgrade the firmware on the unit.

This is the latest firmware package for the Clipsal Wiser for C-Bus Automation Controller (5500SHAC) unit. Refer to the user manual for instructions on how to upgrade the firmware on the unit.

This is the latest firmware package for the Schneider Electric C-Bus Network Automation Controller (LSS5500NAC) unit. Refer to the user manual for instructions on how to upgrade the firmware on the unit.

This is the latest firmware package for the Schneider Electric Wiser for C-Bus Automation Controller (LSS5500SHAC) unit. Refer to the user manual for instructions on how to upgrade the firmware on the unit.

Wiser Android provides a connection to your Wiser Home Control System. Either locally through your home's wireless access point or via your mobile phone's 3G connection, control of your home through Wiser is as simple as connecting. Once connected, there is nothing to configure. You will have available at your fingertips, everything your Wiser Home Control has access to. This may include lighting, security, climate, entertainment as well as energy and camera monitoring. You can even have multiple connections simultaneously with a consistent user experience across all.

The Wiser Windows Media Centre Plug-in is a plug-in for the Microsoft Windows Vista Media Centre which allows many devices in a home to be controlled from a Media Centre. It requires a Windows Media Centre and a Wiser Home Control unit, connected to a C-Bus system.

Suits Nokia mobile phones based on the Symbian S60 operating system
Note: Turn off the Online Certified Check on the mobile phone before downloading the application

The Wiser Nokia Mobile Phone Application is an application which allows many devices in a home to be controlled from a Nokia mobile phone. It requires a compatible Nokia mobile phone (one that supports Adobe Flash Lite 3.0) and a Wiser Home Control unit, connected to a C-Bus system.

The C-Bus Ripple software is an application you run on your personal computer to stream music to an MRA Matrix Switcher. The software will catalogue your music collection and allow you to sort it in many ways including album art. This also allows advanced control of music selection via C-Bus.

The C-Bus IP Utility is used for configuring IP based C-Bus devices, such as the C-Bus Network Interface (CNI).

Note: As of version 1.5.0 of this utility the 5500CN units are no longer supported. They will not be detected when performing a scan and can no longer be configured using this utility. Customers requiring this functionality can download and use the Lantronix Device Installer tool instead. A link to this tool can be found on this page.

The Media Player Control Plugin allows Schedule Plus, Home Gate and the Colour Touch Screen to interact with Microsoft Media Player V9 on a networked PC. It allows for the display of media information and remote operation of the Media Player.

This Redirector software is a stand-alone application supplied by Lantronix. It is intended to be used in conjunction with your C-Bus Installation Software to redirect data from an Ethernet socket to a "Virtual COM Port." This means that the user can perform a network scan using a C-Bus Network Interface (5500CN).

The Lantronix Device Installer software can be used to scan and configure 5500CN units. Documentation and the current version can be found at the following external site:

The Microsoft XML Parser Runtime is used by most of our software products for reading and writing project files. In most cases your computer will already have this installed. If our software detects that you don't have this installed it will let you know and you can use the link below to download and install the software.

C-Bus Calculator is a Network Design Verification tool. It enables the designer of any C-Bus Network to confirm that the critical network operating parameters are within acceptable limits. Considerations for design verification include:

• Network Impedance
• Power Supply Requirements
• Unit Type and Quantity
• Electrical Safety